User's Manual

iPOINT X – Hardware User Manual | 18.06.2020
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
15
2.3.1 RS422 MASTER Connectors & Pinout
Wago: 713-1404 Pin Number Designator Comment
1 V+ Supply Voltage from the Barrier: +15V DC (+/-1%)
2 V+ Supply Voltage from the Barrier: +15V DC (+/-1%)
3 GND Ground Supply from the barrier
4 GND Ground Supply from the barrier
5 RX- RS422 communication from the barrier
6 TX- RS422 communication from the barrier
7 RX+ RS422 communication from the barrier
8 TX+ RS422 communication from the barrier
2.3.2 RS485 MASTER Connectors & Pinout
Wago: 713-1404 Pin Number Designator Comment
1 V+ Supply Voltage from the Barrier: +15V DC (+/-1%)
2 V+ Supply Voltage from the Barrier: +15V DC (+/-1%)
3 GND Ground Supply from the barrier
4 GND Ground Supply from the barrier
5 DATA- RS485 Data communication from the barrier
6 DATA- *pin 6 bridged to pin 5*
7 DATA+ RS485 Data communication from the barrier
8 DATA+ *pin 8 bridged to pin 7*
2.3.3 RS422 HOST Connectors & Pinout
Wago: 713-1404 Pin Number Designator Comment
1 - Not Connected
2 - Not Connected
3 - Not Connected
4 - Not Connected
5 RX- RS422 communication from the barrier
6 TX- RS422 communication from the barrier
7 RX+ RS422 communication from the barrier
8 TX+ RS422 communication from the barrier
2.3.4 RS485 HOST Connectors & Pinout
Wago: 713-1404 Pin Number Designator Comment
1 - Not Connected
2 - Not Connected
3 - Not Connected
4 - Not Connected
5 DATA- RS485 Data communication from the barrier
6 DATA- *pin 6 bridged to pin 5*
7 DATA+ RS485 Data communication from the barrier
8 DATA+ *pin 8 bridged to pin 7*