User's Manual

MorphoAccess® SIGMA Extreme Series - Installation Guide
Section 3 : Installation Procedure
Identity & Security
2017_2000024418 - Draft
V0
January 2017
This document and the information therein are the property of Safran Identity & Security.
They must not be copied or communicated to a third party without the prior written authorization of Safran
33
Cabling
To ensure water tightness, be sure to bend the cable downward.
Cable for wiring shall be AWG 20 to 24, length shall be adapted to the size of the hole
in the wall, to terminal connections, and to the distant between the electric source
and the terminal itself.
Closing
Power has to be set up just after closing it. If product has to be stored for a long time
(more than 48 hours), don’t forget to restore its configuration before use.
Finally, lock the product with the screws at the bottom of the terminal.
IP65
!