User's Manual

MorphoAccess® SIGMA Lite Series – Installation Guide
Section 2 : General Description
2015_2000007248-V1 - Draft
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior written authorization of Morpho
18
June 2015
Box opening
At the box opening, components shall be extracted from the protection casing as
depicted in the pictures below.
Extract the wall plate (which is not screwed to the terminal) and keep it separate until
the installation of the terminal is completed. The screwing of the product to the wall
plate is the last stage of the installation.
The protection accessory provided is optional: it is recommended in case of outdoor
installation (to protect biometric module against dust, rain and direct sun rays).
Figure 2: Box Opening