User's Manual

MorphoAccess® VP Series - User Guide

Section 3: Connecting a MorphoAccess® to a PC

33 M

ORPHO DOCUMENT

EPRODUCTION AND

ISCLOSURE

ROHIBITED

SSE-0000082427-01

January 2011

Setting up IP parameters with a USB Mass Storage Key

The IP configuration parameters can be set by using a USB mass storage key. No

wired connection with a PC is required. This operation requires a standard USB Mass

Storage key (FAT16 or FAT32 formatted, and 8 Gbyte maximum), and a dedicated PC

application: USB Network Configuration Tool.

This procedure is useful for MorphoAccess® terminals without keyboard and screen,

but is applicable also to MorphoAccess® terminals with keyboard and screen.

The procedure is detailed in the sections below, and in the MorphoAccess® USB

Network Tool User Guide document.

First step: build a configuration file on USB Mass Storage Key

Run the USB Network Configuration Tool application on a PC: an interface window

such as the one below is opened by the application.

Figure 14: USB Network Configuration Tool main window

Then insert the USB mass storage key into a free USB port of the PC.