Operation Manual


7
recharger into water! It is forbidden to use paint thinner, alcohol, petrol, etc.
17. Attention! Before cleaning, switch the device off.
18. Attention! Do not use alcohol, acetone, benzene, scouring cleaning agents, etc., to clean
the synthetic parts of the device. Do not use hard brushes or metallic objects.
19. If the power cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Contact your nearest customer service for additional information regarding cleaning the drill.
This device is intended for private use and must not be used for commercial purposes.
Danger of suffocation! Keep all packaging materials away from children, especially small
children.
OPERATION
WARNING: The Safety instructions should be read through thoroughly before you use this
tool.
POWER SUPPLY:
Plug the power cord into the drill. As soon as the drill has power, the red indicator light goes on.
This shows that the cordless screwdriver is being charged. It stays on until the recharger is
unplugged.
TIGHTENING/LOOSENING SCREWS
This cordless screwdriver is equipped with a forward/reverse switch (lever). With this, the
direction of rotation can be changed.
1. To drill clockwise, press on the button.
To drill counter-clockwise, press the button.
To stop drilling, let go off the button.
MAINTENANCE
This cordless screwdriver does not need to be serviced. Repairs should only be performed by
qualified professionals (see Safety instructions).
DESCRIPTION
1. Chuck
2. Switch
3. Indicator light
4. Plug