Operation Manual

14
BEFORE FIRST USE
Read through these instructions carefully. Pay close attention to the
safety information. Keep these instructions for future reference and
pass them along to future users.
INSERTING BATTERIES
1. Open battery compartment.
2. Insert 4 AA type batteries and pay attention to the correct polarity.
(Fig.1)
3. Put the cover back on to close the battery compartment.
Fig.1
INSTALLATION
1. Decide whether you prefer installation with Velcro strips or screws.
You could also use a combination of both. Wall anchors are
included for installation with screws.
2. Insert the batteries. Refer to the section on inserting batteries.
3. Select an installation location.
LX-LD-P300_A6_120829.indb 14 30/8/12 4:16 PM