Datasheet

www.apem-idec.eu
D-008
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Emergency Stop Switches
X6
XA
XW
XN
SEMI
ø16 X6 Series Emergency Stop Switches (Unibody)
The smooth and ridge-less button surface prevents dust built-up,
and is also easy to clean.
ø16mm X6 Series Conventional Operator
Two ways to reset,two button sizes,two wiring methods.
Excellent safety
Only 19.5 mm depth behind the panel
Unparalleled design
Prevents dust build-up
IDEC’s unique Reverse Energy Structure,
achieved as a result of in-depth failure
analysis of emergency stop switches, has
resulted in this innovative emergency stop
switch.
X6 series emergency stop switches provide
the highest level of safety, because the uni-
body design eliminates the possibility of the
contact bocks falling off the switch
Third-generation
Reverse Energy
Structure
The smooth button is ideal for applications that require utmost clean-
liness, such as food processing machines or semiconductor manu-
facturing equipment. Also suitable for applications requiring a sleek
design of emergency stop switches, such as medical equipment.
ø30 mm Button
Arrow Marked
ø30 mm Button
Unmarked
ø40 mm Button
Unmarked
ø40 mm Button
Arrow Marked
The short depth behind the panel reduces the required mounting space.
Depth: 30% reduction
Volume: 70% reduction
(Compared with conventional emergency stop switches)
Thus equipment and control panels can be made much smaller.
19.5
mm
Actual
Size
*1: Solder terminal.
Solder/tab terminal: 23.9mm
*1
The X6 emergency stop switch can be reset either by pulling or turning. The button is available in ø30 mm and ø40 mm sizes.
In addition to a red button, a yellow button is also available as a stop switch. Solder terminals and solder/tab terminals are available.
Pull to reset
Two ways to reset Two connection methods
Turn to reset Solder/Tab Terminal #110Solder Terminal