Datasheet

10
ø22 mm, 4-contact Emergency Stop Switch.
Compact size - only 37.1 mm deep behind the panel (screw terminal type 48.7 mm with terminal cover).
• Lead-free, RoHS compliant.
• The depth behind the panel is only 37.1 mm for 1 to 4 con-
tacts (screw terminal type 48.7 mm with terminal cover).
• The same depth behind the panel for illuminated and non-illu-
minated switches.
• IDEC’s original “Safe break action” ensures that the contacts
open when the contact block is detached from the operator.
• 1 to 4NC main contacts and 1 or 2NO monitor contact
• Push-to-lock, Pull or Turn-to-reset operator
• Direct opening action mechanism (IEC60947-5-5, 5.2,
IEC60947-5-1, Annex K)
• Safety lock mechanism (IEC60947-5-5, 6.2)
• Degree of protection IP65 (IEC60529)
• Screw terminal type is finger-safe (IP20).
• Two operator sizes: ø40 and ø60 mm
• Dark red (Munsell 5R4/12) or bright red (Munsell 7.5R4.5/14)
colors are available for the non-illuminated operator.
• Push-ON illumination type available (operator size: ø60)
• UL, c-UL approved. EN compliant
Direct Opening Action
Contact Ratings
(NC main contacts/NO monitor contact)
• Minimum applicable load: 5V AC/DC, 1 mA (reference value)
(Operating area may vary according to the operating conditions and load types.)
• The rated operating currents are measured at resistive/inductive load types
specified in JIS C8201-5-1.
Note 1: Solder terminal/PC board terminal types: 3A
Note 2: Solder terminal/PC board terminal types: 1.5A
Illumination Ratings
Specifications
Standard Mark
Approval Organization/
File No.
UL508
CSA C22.2 No. 14
UL/c-UL File No. E68961
(solder terminal, PC board
terminal types)
UL/c-UL Listing
(screw terminal type only)
EN60947-5-1
EN60947-5-5
TÜV Product Service
Self-declaration (European
Commission’s Low Voltage
Directive)
Rated Insulation Voltage (Ui)
Screw
Ter minal Type
250V
Solder
Ter minal Type
300V
PC Board
Ter minal Type
Rated Current (Ith) 5A
Rated Operating Voltage (Ue) 30V 125V 250V
Rated Operating Current
Main
Contacts
AC 50/60 Hz
Resistive Load
(AC-12)
–
5A
(Note 1)
3A
Inductive Load
(AC-15)
–
3A
(Note 2)
1.5A
DC
Resistive Load
(DC-12)
2A 0.4A 0.2A
Inductive Load
(DC-13)
1A 0.22A 0.1A
Monitor
Contacts
AC 50/60 Hz
Resistive Load
(AC-12)
– 1.2A 0.6A
Inductive Load
(AC-14)
– 0.6A 0.3A
DC
Resistive Load
(DC-12)
2A 0.4A 0.2A
Inductive Load
(DC-13)
1A 0.22A 0.1A
Rated Voltage Operating Voltage Rated Current
24V AC/DC 24V AC/DC ±10% 15 mA
Applicable Standards
IEC60947-5-1, EN60947-5-1
IEC60947-5-5 (Note), EN60947-5-5 (Note)
JIS C8201-5-1, UL508, CSA C22.2 No. 14
Operating Temperature
Non-illuminated: –25 to +60°C (no freezing)
LED illuminated: –25 to +55°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Storage Temperature –45 to +80°C
Operating Force
Push to lock: 32N
Pull to reset: 21N
Tu rn to reset: 0.27 N·m
Minimum Force
Required for Direct
Opening Action
80N
Minimum Operator
Stroke Required for
Direct Opening Action
4.0 mm
Maximum Operator
Stroke
4.5 mm
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Overvoltage Category II
Impulse Withstand
Voltage
2.5 kV
Pollution Degree 3
Operation Frequency 900 operations/hour
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 1000 m/s
2
Vibration Resistance
Operating extremes: 10 to 500 Hz, amplitude 0.35 mm,
acceleration 50 m/s
2
Damage limits: 10 to 500 Hz, amplitude 0.35 mm,
acceleration 50 m/s
2
Mechanical Life 250,000 operations minimum
Electrical Life
100,000 operations minimum
250,000 operations minimum (24V AC/DC, 100 mA)
Degree of Protection IP65 (IEC60529)
Short-circuit Protection 250V/10A fuse (Type aM, IEC60269-1/IEC60269-2)
Conditional
Short-circuit Current
1000A
Te rminal Style Solder terminal, PC board terminal, M3 screw terminal
Recommended
Tightening Torque for
Locking Ring
2.0 N·m
Connectable Cable
Screw terminal type: 0.75 to 1.25 mm
2
(AWG18 to 16)
Solder terminal / PC board terminal types:
1.25 mm
2
maximum (AWG16 maximum)
Soldering Conditions
20W/5 seconds maximum, or 260°C/3 seconds
maximum
Recommended
Tightening Torque for
Te rminal Screw
0.6 to 1.0 N·m
Weight
ø40 mm type: 72 g
ø60 mm type: 81 g
ø22mm XW Series Emergency Stop Switches