Manual

2: HARDWARE SPECIFICATIONS
2-12 SX5L COMMUNICATION TERMINAL USER’S MANUAL
Analog Input Module SX5L-SBAN041
General Specifications
Analog Input Specifications
Rated Power Voltage 24V AC (50/60Hz) / 24V DC compatible
Power Voltage Range 21.6 to 26.4V AC/DC (including 5% ripple)
Power Consumption 3.0 VA (24V AC), 1.8W (24V DC)
Power Inrush Current 15A maximum (24V AC/DC)
Allowable Momentary Power Interruption 10 ms minimum (at the rated power voltage)
Dielectric Strength 1,000V AC, 1 minute between power and FG terminals
Insulation Resistance 100 MΩ minimum between power and FG terminals (500V DC megger)
Operating Temperature 0 to 55°C (no freezing)
Operating Humidity 30 to 90% RH (non-condensing)
Storage Temperature –20 to +75°C (no freezing)
Storage Humidity 30 to 90% RH (non-condensing)
Pollution Degree 2 (IEC 60664)
Corrosion Immunity Atmosphere free from corrosive gases
Altitude
Operation: 0 to 2,000m
Transport: 0 to 3,000m
Vibration Resistance
10 to 57 Hz amplitude 0.075 mm, 57 to 150 Hz acceleration 9.8 m/s
2
2 hours per axis on each of three mutually perpendicular axes
Shock Resistance 294 m/s
2
, 11-ms sinusoidal half-wave pulse
Mounting 35-mm-wide DIN rail, direct panel mounting (M4 mounting screws)
Weight (approx.) 250g
Input Points 4 points
Input Type
Voltage input: 1 to 5V DC
Current input: 4 to 20 mA DC
Input Impedance
Voltage input: 1 MΩ
Current input: 250Ω
Digital Resolution 12 bits
A/D Conversion Time 80 ms per point
Sample Duration Time 300 ms per point
Error
±0.6% (at 25°C)
±1.0% (over the operating temperature range)
Isolation between Input Channels No isolation
Dielectric Strength
500V AC, 1 minute between input and FG terminals
500V AC, 1 minute between input and power terminals
Insulation Resistance
100 MΩ minimum between input and FG terminals (500V DC megger)
100 MΩ minimum between input and power terminals (500V DC megger)