Datasheet

5
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier)
Accessories (optional)
Sensor Mounting Brackets
Item Part No.
Package
Quantity
Sensor
Mounting
Brackets
Vertical Mounting
SA9Z-K01
1
Horizontal Mounting
SA9Z-K02
Cover Type
SA9Z-K03
Back Mounting
SA9Z-K04
See page 8 for dimensions. •
Two mounting screws (M3 × 12 mm sems screws) are supplied •
with the SA9Z-K01 and SA9Z-K02.
Two mounting screws (M3 × 14 mm sems screws) are supplied •
with the SA9Z-K03.
The through-beam type requires two mounting brackets, one •
each for the projec tor and the receiver.
The SA9Z-K02 cannot be used for the connector models. •
Contact IDEC about mounting brackets for the connector models. •
Slits (for through-beam)
Item Slit Size Part No. Ordering No.
Package
Quantity
Round Slit
ø0.5 mm
SA9Z-S12 SA9Z-S12PN02
2ø1.0 mm
SA9Z-S13 SA9Z-S13PN02
ø2.0 mm
SA9Z-S14 SA9Z-S14PN02
See page 6 for dimensions. •
Reflectors
Item Part No.
Package
Quantity
Reflector
IAC-R5
1
IAC-R8
IAC-R9
See page 9 for dimensions. •
Reflector Mounting Brackets
Item Part No.
Package
Quantity
Reflector
Mounting
Bracket
For IAC-R5
IAC-L2 (Note 1)
1For IAC-R9
IAC-L3 (Note 2)
For IAC-R8
IAC-L5 (Note 3)
See page 10 for dimensions.•
Note 1: The IAC-L2 is not supplied with M4 mounting screws and
nuts.
Note 2: The IAC-L3 is supplied with two M3 mounting screws
(M3 × 8 mm sems screws).
Note 3: The IAC-L5 is supplied with two M4 mounting screws
(M4 × 10 mm sems screws).
Air Blower Mounting Block
Item Part No.
Package
Quantity
Air Blower Mounting Block
SA9Z–A02
1
See page 10 for dimensions. •
Two mounting screws (M3 × 20 mm sems screws), one M5 × 6 •
mm screw for plugging the air supply port, and one gasket (0.5
mm thick) are supplied.
The air tube fitting and mounting bracket are not supplied and •
must be ordered separately (recommended mounting bracket:
SA9Z-K01).
Material: Anodized aluminum surface •
Connector Cable (for connector models)
Number of
Core Wires
Style & Length Part No.
Package
Quantity
4
Straight, 2m
SA9Z-CM8K-4S2
1
Straight, 5m
SA9Z-CM8K-4S5
Right angle, 2m
SA9Z-CM8K-4L2
Right angle, 5m
SA9Z-CM8K-4L5
See page 10 for dimensions.•
Contact IDEC for UL approved cables.•
Sensitivity Control Screwdriver
Item Part No.
Package
Quantity
Sensitivity Control Screwdriver
SA9Z-AD01
1
(12/04/19)