Datasheet
10
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier)
Dimensions
Reflector Mounting Brackets
Connector Cable (connector on one end)
ø5.2
ø9.6
32
➃ Black ➁ White
➂ Blue ➀ Brown
ø5.2
28
ø9.6
16.5
➃ Black ➁ White
➂ Blue ➀ Brown
Straight (SA9Z-CM8K-4S)
Cable length: 2 or 5m
Dielectric strength when installed on the SA1E-L: 1000V AC (between live part and mounting bracket, except between live part and tightening ring)•
Right-angle (SA9Z-CM8K-4L)
Cable length:
2 or 5m
Air Blower Mounting Block
The SA9Z-A02 air blower mounting block •
is supplied with two mounting screws (M3
× 20 mm sems screws), one screw for
plugging the air supply port (M5 × 6 mm),
and one gasket (1 mm thick) for plugging
the air supply port.
An air tube fitting can be installed to either •
the top or side. Tighten the fitting to a
torque of 0.5 N·m maxi mum.
The air tube fitting and mounting bracket •
are not supplied and must be ordered
separately (recommended mounting
bracket: SA9Z-K01).
All dimensions in mm.
5.8
14.0
8.0
37.0
25.4
25.0
6.9
M5
P0.8
M5
P0.8
(Material: Anodized aluminum surface)
2-ø3.2
(3.2)
3.5 19.5 2.0
(3.8)
31.5
Recommended
mounting
bracket (SA9Z-K01)
Air Blower
Mounting Block
10.9
14.0
8.0
3.4
Air supply port
Plugging screws
for air supply port
(M5), Gasket
(used on one
side only)
6.5
42.5
SA9Z-A02
With Mounting Bracket
IAC-L2 (for IAC-R5) IAC-L3 (for IAC-R9) IAC-L5 (for IAC-R8)
Material: SPCC (zinc plating)
42
5.5
19
6
28
37
74
113
2
2-ø3.4
4-ø4.4
30
58
70
60
44
20
1.6
25
1610
8
6
Material: SPCC (zinc plating)
8-M3 × 0.5 holes
25
4.5
11
10
35
(3)
40
4.5
10
Material: SPCC (zinc plating)
26
12
35
(28)
(3)
20
(2)
61
16
15
18
7
40
50
11
8-M3 × 0.7 holes
(12/04/19)