Manual

2: MODULE SPECIFICATIONS
2-6 WEB SERVER CPU MODULE USER’S MANUAL FC9Y-B1278
Note 1: Select program capacity of 62,400 bytes or 127,800 bytes. When 127,800 bytes is selected, the run-time program download
cannot be used.
Note 2: The maximum number of outputs that can be turned on simultaneously is 54.
Note 3: Among the additional I/O modules, the maximum number of outputs that can be turned on simultaneously is 54.
System Statuses at Stop, Reset, and Restart
Note: All expansion data registers are keep types.
Communication Function
Note 1: To use the USB port, USB driver must be installed on the PC. For the procedure to install the driver, refer to "USB Driver
Installation Procedure" on page A-3.
Note 2: A USB maintenance cable (HG9Z-XCM42) and a USB Mini-B extension cable (HG9Z-XCE21) are available as optional accessories.
For instructions on using the USB extension cable, refer to "Securing USB Extension Cable Using Cable Tie" on page 3-5.
Note 3: Communication modules that can be connected to port 2 are listed in the following table.
Analog Voltage Input
Quantity:
Input voltage range:
Input impedance:
Data range:
1 point
0 to 10V DC
Approx. 100 kΩ
0 to 255 (8 bits)
Pulse Output
3 points
Maximum frequency: 100 kHz
Communication Port Communication connector for port 2
Cartridge Connector 2 points for connecting a memory cartridge (32KB, 64KB, or 128KB) and a clock cartridge
Mode Output
Internal Relay, Shift Register, Counter,
Data Register, Expansion DR, Extra DR
Timer Current Value
Keep Type Clear Type
Run Operating Operating Operating Operating
Stop (Stop input ON) OFF Unchanged Unchanged Unchanged
Reset (Reset input ON) OFF OFF/Reset to zero OFF/Reset to zero Reset to zero
Restart Unchanged Unchanged OFF/Reset to zero Reset to preset
CPU Module
FC5A-D12K1E
FC5A-D12S1E
USB
Function Maintenance Communication (Note 1)
Cable USB cable from the third party (A connector to Mini-B connector) (Note 2)
Isolation between Internal Circuit
and Communication Port
Not isolated
USB Type USB Mini-B
USB Standard USB 2.0
Ethernet
Electrical Characteristics IEEE 802.3 compliant
Transmission Speed 10BASE-T, 100BASE-TX
Function
Maintenance communication, user communication, Modbus TCP
communication, e-mail, Web server
Recommended Cable CAT. 5 STP
Isolation between Internal Circuit
and Communication Port
Pulse transformer isolated
User Web Data Storage FROM
User Web Data Capacity 1MB
Port 2 (Optional) (Note 3) Possible