Data Sheet

3
Illuminates objects and periphery brightly. Easy maintenance.
1.5m
LED
500 lx
minimum
Compliant with safety standard of machine tools
Requiement for machine tools (stationary grinding machines)
ISO 16089; 5.8.e
When designing machinery, lighting intensity, direction, glare, etc. shall be taken into account.
When necessary, integral lighting shall be provided. Especially the following items shall be taken into account:
1) the required lighting intensity depends on the grinding operation to be performed. It shall be at least 300 lx in
the area to be observed and its immediate vicinity;
2) glare, reections and shadows, e.g. from workpiece or machine parts, shall be avoided as far as possible;
3) the lighting source shall be positioned to minimize its contamination during machining.
Provides wide-angle, high-illuminance lighting. Brightness
required by the standard* is achieved. Target objects such
as the tip of machine tools and its periphery are lit brighter,
making it easier to check.
* EN1837: 1999 + A1: 2009, 4.2
At least 500 lx shall be provided when arranging lighting for
machines.
LF1D/LF2D-EN2F
LF1D/LF2D-FH
–400 400–800 8000
(mm)
1,
200
800
400
0
(lx)
–800 –400 4008000
1,
200
1,
600
800
400
0
(mm)
(lx)