Data Sheet

Download catalogs and CAD from http://apac.idec.com
M-014
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Sensors
SA1E
SA1E-L
SA1E Miniature Photoelectric Switches (Built-in Amplier)
Slits (for through-beam)
Item Slit Size Part No. Ordering No.
Package
Quantity
Vertical Slit
0.5 mm × 18 mm SA9Z-S06 SA9Z-S06PN02
2
1.0 mm × 18 mm SA9Z-S07 SA9Z-S07PN02
2.0 mm × 18 mm SA9Z-S08 SA9Z-S08PN02
Horizontal Slit
0.5 mm × 6.5 mm SA9Z-S09 SA9Z-S09PN02
1.0 mm × 6.5 mm SA9Z-S10 SA9Z-S10PN02
2.0 mm × 6.5 mm SA9Z-S11 SA9Z-S11PN02
Round Slit
ø0.5 mm SA9Z-S12 SA9Z-S12PN02
ø1.0 mm SA9Z-S13 SA9Z-S13PN02
ø2.0 mm SA9Z-S14 SA9Z-S14PN02
Reflectors (for polarized retro-reflective)
Item Part No.
Package
Quantity
Reector
Standard IAC-R5
1
Small IAC-R6
Large IAC-R8
Narrow (rear/side mounting) IAC-R7M
Narrow (rear mounting) IAC-R7B
Narrow (side mounting) IAC-R7S
Tape Type (40 × 35 mm) IAC-RS1
Tape Type (80 × 70 mm) IAC-RS2
Reector
Mounting
Bracket
For IAC-R5 IAC-L2
For IAC-R6 IAC-L3
For IAC-R8 IAC-L5
• See M-016 to M-017 for dimensions.
• The IAC-L2 is not supplied with mounting screws and nuts. Use commercially
available M4 screws and nuts for mounting the IAC-R5 reector.
• The IAC-L3 is supplied with two mounting screws (M3 × 8 mm sems screws).
• The IAC-L5 is supplied with two mounting screws (M4 × 10 mm sems screws).
• The IAC-R7M and IAC-R7S are supplied with two M3 × 8 mm self-tapping
screws, two at washers, and two spring washers.
• The IAC-R7B is supplied with an M3 × 8 mm self-tapping screw, a at washer,
and a spring washer.
Sensor Mounting Brackets
Item Part No.
Package
Quantity
Main Unit
Mounting
Brackets
Vertical Mounting SA9Z-K01
1
Horizontal Mounting SA9Z-K02
Cover type SA9Z-K03
Back Mounting SA9Z-K04
• Two mounting screws (M3 × 12 mm sems screws) are supplied with the
SA9Z-K01 and SA9Z-K02.
• Two mounting screws (M3 × 14 mm sems screws) are supplied with the
SA9Z-K03.
• The through-beam model requires two mounting brackets, one each for the
projec tor and the receiver.
• The SA9Z-K02 cannot be used for the connector models.
• Contact IDEC about mounting brackets for the connector.
Connector Cable (for M8 connector model)
Number of
Core Wires
Style & Length Part No.
Package
Quantity
4
Straight, 2m SA9Z-CM8K-4S2
1
Right angle, 2m SA9Z-CM8K-4L2
Straight, 5m SA9Z-CM8K-4S5
Right angle, 5m SA9Z-CM8K-4L5
Reflectors
(used only for coaxial polarized retro-reflective)
Item Part No.
Package
Quantity
Reector
Standard IAC-R9
1
Small IAC-R10
Ultra-small IAC-R11
Reector Mounting Bracket For IAC-R9 IAC-L3
Air Blower Mounting Block
Item Part No. Package Quantity
Air Blower Mounting Block SA9Z–A02 1
• Two mounting screws (M3 × 20 mm sems screws), one M5 × 6 mm screw for
plugging the air supply port, and one gasket (0.5 mm thick) are supplied.
• The air tube tting and mounting bracket are not supplied and must be
ordered separately (recommended mounting bracket: SA9Z-K01).
• Material: Anodized aluminum surface
Sensitivity Control Screwdriver
Item Part No. Package Quantity
Sensitivity Control Screwdriver
SA9Z-AD01 1
Accessories (optional)
Download catalogs and CAD from http://eu.idec.com/downloads