Datasheet

Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - HW Series
Switches & Pilot Devices
666
www.IDEC.com
1705151132
0.5
Without Button
Markings
With Button Markings
(I/ON and O/OFF)
Panel Thickness 0.8 to 6
14.5
20
49.4 (2 contacts)
69.4 (3 or 4 contacts)
54.8
29.8
54.8
29.8
41.4
Rubber Gasket
Locking Ring
Safety Lever Lock
HW
ON
OFF
R0.8 max.
0
+0.4
+0.4
0
30
55 **
ø22.3
+0.2
0
*3.2
24.1
-The 3.2 mm recess is for preventing
rotation and is not necessary when a
nameplate or anti-rotation ring is not used.
-When using the safety lever lock,
determine the vertical spacing in
consideration of convenience for installing
and removing the safety lever lock.
-Recommended vertical spacing: 100 mm
-The minimum mounting centers are
applicable to switches with one layer of
contact blocks (two contact blocks). When
two layers of contact blocks are mounted,
determine the minimum mounting centers
for ease of wiring.
With Pilot Light
Full Voltage
Full Voltage Adapter
69.4 (2 contacts), 89.4 (4 contacts)
(Note)
HW
(Bottom Button)
(Top Button)
The depth of a 3-contact model depends on the combination of
contact blocks at top and bottom pushbuttons.
Top Button 1 contact block 2 contact blocks
Bottom Button 2 contact blocks 1 contact block
Depth 89.4 mm 69.4 mm
Transfomer (240V minimum) Transformer (480V)
79.5 (2 contacts), 99.5 (4 contacts)
Transformer
HW
89.5 (2 contacts), 109.5 (4 contacts)
Transformer, DC-DC Converter
HW
Monolever Dimensions (mm)
Locking Ring
Panel Thickness 0.8 to 6
49.4
(
2 blocks)
ø34.2
LOCK
29.4
41.4
25
M3.5 Terminal
Screw
69.4
(
4 blocks
)
24
24
36 max.
36 max.
72
8
45.5