Datasheet

Switches & Pilot DevicesSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
ø22mm - HW Series
Switches & Pilot Devices
640
www.IDEC.com
1705151132
Part Number Structure
H W 1 F – 21 F 20 Q D – G – 24V
Position
2: Maintained
21: Spring Return
from Right
Lamp Code
D: LED
Blank: Incandescent
Bezel
1: Plastic
4: Metal
Illumination Circuit
Q: Full Voltage
H2: Transformer 120V AC
M4: Transformer 240V AC
T8: Tranformer 480V AC
11: 1NO-1NC
20: 2NO
22: 2NO-2NC
Contact Arrangement
(Full voltage units only)
6V: 6V AC/DC
12V: 12V AC/DC
24V: 24V AC/DC
120V: 120V AC*
240V: 240V AC*
*LED only
Lamp Voltage
A: Amber
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Lens Color
Illuminated Selector Switches 2-Position (Replacement Parts)
Transformer* +
Contact
Blocks
+
Lead
Holder
+
Mounting
Adaptor
+
Safety
Lever Lock
+ Lamp +
Anti-Rotation
Ring
+ Operator + Lens = Completed Unit
*Transformer not needed with full voltage models.
Lamp Circuit Components
Style Description Terminals
Part
Number
Lead Holder
For use with HW-CBL on all
illuminated pushbutton units.
One required for each deck
(pair) of contacts.
HW-LH3
Dummy Block with
Full Voltage Adaptor
For use with
odd number of
contacts.
Fingersafe HW-DA1FB
Exposed HW-DA1B
Spring Up HW-GA1
Full Voltage Adaptor
For use with
even number of
contacts.
Fingersafe TW-DA1FB
Exposed TW-DA1B
Transformer Unit
(6V secondary
voltage)
120VAC
240VAC
480VAC
Fingersafe
TW-F126B
TW-F246B
TW-F486B
120V
240V
480V
Spring Up
HW-T126
HW-T246
HW-L486
120V
240V
480V
Exposed
TW-T126B
TW-T246B
TW-T486B
DC-DC Converter 110VDC HW-L16D
1. HW-GA1 “Dummy Block with full voltage adaptor” does not require the
use of HW-LH3.
2. DC-DC convertor features spring-up terminals.
3. DC-DC convertor applicable voltage range 90-140V DC.
Operators
Style Description
Plastic
Bezel
Metal Bezel
Maintained HW1F-2 HW4F-2
Spring return
from right
HW1F-21 HW4F-21
Illuminated knobs must be ordered separately.
Contact Blocks
Style Contacts 1NO 1NC
Standard
Fingersafe (IP20)
HW-F10
HW-F10R (early make)
HW-F01
HW-F01R (late break)
Spring-Up
Terminal
HW-G10
HW-G10R (early make)
HW-G01
HW-G01R (late break)
Exposed Screw
Terminal
HW-C10
HW-C10R (early make)
HW-C01
HW-C01R (late break)
Contact Block Mounting Adaptor
Style Part Number
HW-CBL
1. Used to mount contact blocks to
operator (rst pair only).
2. IDEC strongly recommends
using the safety lever lock to prevent
heavy vibration or maintenance
personnel from inadvertently
unlocking contacts.
Safety Lever Lock
Style Part Number
HW9Z-LS
Illuminated Knob
Appearance Part Number
HW9Z-FDY-k
In place of k, specify the
Color Code.
k Lens/LED Color Code
Color Code Color Code
Amber A Blue S
Green G White W
Red R Yellow Y
Anti-Rotation Ring
Style Part Number
HW9Z-RL
Use with notched panel cutout to
prevent unit rotation.
Lamps
Style Voltage Part Number
LED
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
Incandescent
6V AC/DC IS-6
12V AC/DC IS-12
24V AC/DC IS-24
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor and
reverse polarity protection diodes.
3. Use white LED for yellow lens. Yellow LED not
available.