Datasheet
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
619
800-262-IDEC (4332) • USA & Canada
ø22mm - HW Series
Switches & Pilot Devices
1705151132
Push Pull & Unibody E-Stop Pushbuttons (Assembled)
ø40mm Head Push–Pull
Contacts Plastic Bezel Metal Bezel
Operator Only (Red) HW1B-Y2R HW4B-Y2R
Operator Only (Yellow) HW1B-Y2Y HW4B-Y2Y
1NO
HW1B-Y2F10-j† HW4B-Y2F10-j†
1NC
HW1B-Y2F01-j† HW4B-Y2F01-j†
1NO-1NC
HW1B-Y2F11-j† HW4B-Y2F11-j†
2NC
HW1B-Y2F02-j† HW4B-Y2F02-j†
2NO
HW1B-Y2F20-j† HW4B-Y2F20-j†
Unibody Illuminated E-Stops*
Contacts LED Incandescent
1NO-1NC
HW1E-LV4F11QD-R-l HW1E-LV4F11Q-R-l
2NC
HW1E-LV4F02QD-R-l HW1E-LV4F02Q-R-l
2NC (with push-on
illumination)
HW1E-TV4F02QD-R-l HW1E-TV4F11Q-R-l
1NO-1NC (with push-on
illumination )
HW1E-TV4F11QD-R-l HW1E-TV4F02Q-R-l
1. * Available in Red only.
2. † Available in red or yellow. Insert color code in place of j (R: Red, Y: Yellow).
3. In place of l, specify Full Voltage Code.
4. With single unit construction, the positive action contacts are integrated in the body of the switch. This provides an extra degree of safety and reliability for critical emergency stop functions.
5. In the illuminated version, the light is independent of the switch action (except push-on LED model).
6. For accessories, see page 658.
7. For dimensions, see page 660.
8. For nameplates and shrouds, see page 658.
9. For contact assembly part numbers, see page 658.
10. All HW Series E-Stop operators include non-removable color caps.
11. All HW series E-Stops comply with EN60947-5-5, the IEC “E-Stop Addendum to the Low Voltage Directive,” this includes “tamper proof” operation whereby a change of contact state is not
possible by “teasing” or “oating” the operator.
12. All HW series E-Stop switches comply with SEMI S2 standards.
13. All assembled part numbers in catalog include standard ngersafe (HW-F...) contacts.
14. Assembled units with spring-up terminals (HW-G...) can be ordered by removing an “F” from the part number (Ex. HW1B-M1F11-R becomes HW1B-M111-R).
15. Units with exposed screw terminals (HW-C...) must be ordered as sub-components.
16. Additional contact congurations available (up to 6 total contacts).
ø40mm Unibody Pushlock Turn Reset*
Contacts Plastic Bezel
1NO-1NC HW1E-BV4F11-R
2NC HW1E-BV4F02-R
1NO-2NC HW1E-BV412R-TK2093-1
l Full Voltage Code
Voltage Code
6VAC/DC 6V
12VAC/DC 12V
24VAC/DC 24V
120V AC* 120V
240V AC* 240V
*LED only.
Terminal Numbering
(Unibody only)
Models Terminal Number
1NO-1NC NO = 13/14, NC = 11/12
2NC NC = 11/12, NC = 21/22
HW1E-L
HW1E-T
Lamp + = X2, Lamp - = X1