Datasheet

17
HS6E Subminiture Interlock Switches with Solenoid
Dimensions
Rubber Bushing
Note 1
Actuator Stop (supplied)
3.5
1.2
When mounted (5)
14
8.4
43.2
14
15 0.8
(15.8)
20.9
10.4
2-ø9
2-ø4.3
When mounted (33.8)
When
mounted (5.6)
When mounted (5)
Rubber Bushing
(Note) Actuator Stop (supplied)
14
2-ø4.3
34
1413.1
3.5
1.2
8.4
0.8
ø2-9
Orienting Insert
Orienting Insert
(Note)
Actuator Stop (supplied)
(M4 Holes)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Angle Adjustment
(M3 Hexagon Socket
Head Screw)
Horizontal Adjustment
Vertical Adjustment
34
7.5
28.2 13
2.5
2
20°
5.5
16.8
25
15
20°
R2.1
0.8
1.2
3.5
Mounting Plate (supplied)
0.8
1.2
3.5
14
13.1 14
41.1
8.4
2-ø9
2-ø4.2
When mounted (33.8)
When mounted (6.2)
When mounted (6.2)
When mounted (10.2)
(Note) Actuator Stop (supplied)
Rubber Bushing
20°
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Horizontal Adjustment
Vertical Adjustment
20°
Angle Adjustment
(M3 Hexagon Socket Head Screw)
(Note 1)
Actuator Stop (Supplied)
Orienting Insert
Horizontal Adjustment Vertical Adjustment
25
2-M4 Screw
(ø4.3 or M4 tapping screw)
4
130
15
ø4
ø10
(24)
6.5
(24.5)
18
3
915
Straight Actuator (HS9Z-A61) Right-angle Actuator (HS9Z-A62)
The retention force of the HS9Z-A62 actuator
is 100N. When tensile force exceeding 100N is
expected, use the HS9Z-A62S actuator.
Actuator Mounting Hole Layout
(horizontal/vertical swing)
Right-angle Actuator
with Mounting Plate (HS9Z-A62S)
Note: The actuator stop is used to adjust the actuator position. Remove the actuator stop after the actuator is mounted.
Angle Adjustable Actuator
(HS9Z-A66)
The HS9Z-A65 and HS9Z-A66
have the metal key inserted in
opposite directions.
Actuator Adjustment
Orientation
The orientation of actuator adjustment
(horizontal/vertical) can be changed
using the orienting insert (white plastic)
installed on the back of the actuator.
Note: The base is made of glass-reinforced PA66 (66 nylon). Angle adjustment screws are stainless steel.
When using adhesive on screws, take material compatibility into consideration.
Accessory
Description Part No.
Manual Unlock Key (long)
HS9Z-T3
Manual Unlock Key
(supplied) (plastic)
Manual Unlock Key
(long) (metal)
Angle Adjustable Actuator
(HS9Z-A65)
All dimensions in mm.
Note: See page 23 for actuator installation.
HS6E