Datasheet

18
Horizontal/Vertical Actuator Orientation
Orienting Insert
Horizontal Swing Vertical Swing
The orientation of actuator swing (horizontal/vertical) can be changed using the orienting insert (white
plastic) installed on the back of the actuator. Attach the orienting insert if necessary. (See left diagram)
Do not lose the orienting insert, otherwise the actuator will not operate properly.
Actuator Mounting Reference Position
HS9Z-A52
Actuator
Actuator Cover
Actuator Stop
Interlock Switch
Door Stop
HS9Z-A51
Actuator
Actuator Stop
Interlock Switch
Door Stop
As shown in the gure on the right, the mounting reference
position of the actuator when inserted in the interlock switch
is the position where the actuator stop placed on the actuator
lightly touches the side surface of the interlock switch.
Note: After mounting the actuator, remove the actuator stop from the
actuator.
Actuators for HS5 Series Interlock Switches
Actuator Dimensions and Mounting Hole Layouts All dimensions in mm.
20
5
R3.2
72 58
44
33 max.
12
(21)
1
20°
29
58
2-M6
Screw
18
Actuator Mounting
Hole Layout
(Angle Adjustable [vertical]
)
Angle Adjustment
(M3 hexagon socket head bolt)
Door Hinge
Side
Note: Actuator Stop Film
(supplied with the actuator)
(M4 Hole)
R2.1
20°
20°
Note: Actuator Stop Film
(supplied with the actuator)
Angle Adjustment
(M3 hexagon socket head bolt)
Angle Adjustment
(M3 hexagon socket head bolt)
(Horizontal Swing)
(V
ertical Swing)
Orienting
Insert
Orienting
Insert
48.4
14.4
7
18.5
28.5
3
3.6
1
23
26
38
Note: Actuator Stop Film
(supplied with the actuator)
0.8
2
382-M4 Screw
Actuator Mounting Hole Layout
(Angle Adjustable)
(vertical/horizontal)
Note: The actuator stop lm and actuator stop are supplied with the
actuator and used when adjusting the actuator position. Remove
after the actuator position is determined.
Angle Adjustable (vertical) (HS9Z-A53)
Angle Adjustable (vertical/horizontal) (HS9Z-A55)Angle Adjustable (vertical/horizontal) (HS9Z-A55S)
R2.1
3.6
1
38
26
23
28.519.5
8
4
20°
16.6
49
0.8
2
38
Actuator Mounting Hole Layout
(Angle Adjustable) (vertical/horizontal)
w/Plate
(M4 Hole)
20°
Note: Actuator Stop Film
(supplied with the actuator)
Angle Adjustment
(M3 hexagon socket head bolt)
Angle Adjustment
(M3 hexagon socket head bolt)
(Horizontal Swing)
(Vertical Swing)
Orienting
Insert
Orienting
Insert
Note: Actuator Stop Film
(supplied with the actuator)
2-M4 Screw