Datasheet

Actuator
Description Part No. Package Quantity Remarks
Straight HS9Z-A51
1
Actuator retention force is Fzh=1400N.
Straight with rubber bushings HS9Z-A51A
Right-angle HS9Z-A52
Right-angle with tubber bushings HS9Z-A52A
Angle adjustable (vertical) HS9Z-A53
Angle adjustable (vertical/horizontal) with plate HS9Z-A55S
Angle adjustable (vertical/horizontal) HS9Z-A55
Actuator retention force is Fz=500N. When a retention force of
500N or more is required, use HS9Z-A55S.
Accessories
Description Part No. Package Quantity Remarks
Sliding actuator (Note 1) (Note 2) HS9Z-SH5
1
Door handle
actuator
Handle unit for right-hand door
HS9Z-DH5RH
Choose according to the required opening side.
Handle unit for left-hand door
HS9Z-DH5LH
Switch cover unit
HS9Z-DH5C
Used for installing the interlock switch inside.
Slide handle actuator
HS9Z-EH5L
Spring loaded actuator (Note 2) (Note 3) HS9Z-BA5
Plug actuator HS9Z-A5P
Padlock hasp HS9Z-PH5
Mounting plate (Note 4) HS9Z-SP51 Used when installing the interlock switch on the aluminum frame.
Note 1: For specication on sliding actuators, see separate catalog.
Note 2: Actuator retention force is Fzh=1400N.
Note 3: HS9Z-BA5 can only be used for HS5L interlock switches. Also, HS9Z-BA5 can be used only on slide doors. Do not use on hinge doors.
Note 4: When mounting HS5L-L
(rear unlocking button model) using a mounting plate, provide mounting holes on the mounting plate as shown below
and user Rear Unlocking Button Kit (HS9Z-FL5
 ).
•Follow the instructions on catalog or instruction sheet for proper use of accessories.
Actuators for HS5 Series Interlock Switches
Straight (HS9Z-A51)
Note: Actuator Stop
(supplied with the actuator)
26
15
32.4
28 20
4-R 2.
2
10
0.85.2
(6)
6.2
6.4
2
2-M4 Screw
20
Actuator Mounting Hole Layout
(Straight, Right-angle)
Straight with Rubber Bushings (HS9Z-A51A)
30
7. 3 43.8
15.3
15
2-ø4.3
2
12
0.8
(20)
0.8
2-ø10
2-ø9
When
mounted (5)
Washer (supplied)
Rubber Bushing
Note: Actuator Stop
(supplied with
the actuator)
∗
The mounting center distance is set to
12 mm at the factory. When a 20mm
distance is required, adjust the
distance by moving the rubber
bushing sideways.
∗
The actuator has exibility to the
direction indicated by the arrows.
∗
Mounting centers can be widened to
20mm by moving the Rubber
Bushings.
∗
Mounting centers must be 12 or 20mm.
Vertical
Swing
Actuator Mounting Hole Layout
(Straight with Rubber Bushings)
(Right-angle with Rubber Bushings)
12
2-M4 Screw
Right-angle (HS9Z-A52) Right-angle with Rubber Bushings (HS9Z-A52A)
15
2
2-ø4.4
20
33
29.6
28
0.84.5
27
.27.2
1.6
Note: Actuator Stop
(supplied with the actuator)
Actuator Cover
Vertical
Swing
Horizontal
Swing
∗ When the mounting center
distance is set to 12mm at the
factory, the actuator has exibility
both vertically and horizontally.
∗ When the mounting center
distance is set to 20mm, the
actuator swings vertically.
Adjust the distance by moving the
rubber bushings.
30 15
15.8
8.5
0.8
2
0.8
(11.2)
When mounted (39.7)
When
mounted
When
mounted
(5)
2-ø9
2-ø10
2-ø4.3
12
(20)
Note: Actuator Stop
(supplied with the actuator)
Rubber Bushing
Washer (supplied)
∗
Mounting centers must be 12 or 20mm.
Actuator Dimensions and Mounting Hole Layouts All dimensions in mm.
17