Datasheet

87
HS1L Interlock Switches with Solenoid
Dimensions and Mounting Hole Layouts
Actuator Mounting Reference Position
As shown in the figure on the right, the mounting reference
position of the actuator when inserted in the interlock switch is
where the actuator stop placed on the actuator lightly touches the
interlock switch.
Note: After mounting the actuator, remove the actuator cover and
the actuator stop film.
Interlock switch when using
L-shaped actuator (HS9Z-A2S)
Note: Plug the unused actuator entry slot using the slot plug supplied with the interlock switch.
• Install the interlock switch using four mounting screws when using the actuator entry slot vertical to the mounting panel,
and three mounting screws when using the actuator entry slot horizontal to the mounting panel.
Note: The actuator cover and the actuator stop film are supplied with
the actuator and used when adjusting the actuator position.
Remove them after the actuator position is determined.
✩
When using the actuator entry slot
vertical to the mounting panel.
✩33.5
23.5 26
89
4-M5 Screws
Interlock Switch Mounting Hole Layout
All dimensions in mm.
44.7
3.7
40
35
1.5
89
61
21
4
104
4
12.3
10
36
19.2
45.4
7.5
88
49.5
129
121
10
2
5.
5 4
23.5
26
55.8
70.3
51
5
33
Actuator Entry Slot
(Vertical to mounting panel)
Actuator Entry Slot
(Horizontal to
mounting panel)
HS9Z-A1S
Actuator
Slot Plug
(supplied with the switch)
(Note)
Actuator mounting
reference position
(3.5
±0.5
)∗
5
22
Actuator Cover
Rubber Bushing
(8)
(7.0
±0.5
)∗
45
63
Actuator mounting reference position
Straight Actuator (HS9Z-A1S) L-shaped Actuator (HS9Z-A2S)
18.5
0.8
ø5.1
ø15.0
5.1
When mounted (8)
3
17.6
43
49.39
40 22
Actuator Cover
(gray) (Note)
22
Actuator
Mounting Hole
Layout
2-M5
Screws
11.5
11.5
3
5.1
0.8
42.6
(45.1)
20.5
40
90°
22
ø5.1
ø15
43
17.6
22
When
mounted (8)
Actuator Cover
(gray) (Note)
Actuator Mounting
Hole Layout
2-M5 Screws
(65.8)
17.5
±0.5∗
11.5
(51.3)
21
±0.5∗
HS9Z-A2S Actuator
Actuator Cover
Rubber Bushing
Actuator mounting
reference position
Actuator mounting reference position
Interlock switch when using
straight actuator (HS9Z-A1S)
5
30
20
17.6
58
44
58
72
R3.2
3
18
12
2
33 max.
(21)
20°
2-M6 Screws
Door Hinge
Angle Adjustment Screw
(M3 hexagon sockethead bolt)
Actuator Stop
Film (supplied
with the actuator)
11.5
11.5
3
5.1
0.8
42.6
(45.1)
20.5
40
90°
22
ø5.1
ø15
43
17.6
22
When
mounted (8)
Actuator Cover
(gray) (Note)
Actuator Mounting
Hole Layout
2-M5 Screws
Angle Adjustable (vertical) Actuator
(HS9Z-A3S)
HS9Z-A1S
Actuator
Acuator
Cover
Interlock
Switch
Door Stop
Door Stop Acuator Cover
Interlock
Switch
Interlock
Switch
HS9Z-A2S
Actuator
HS9Z-A3S
Actuator
Actuator
Stop Film
HS1L