Datasheet

HS6B Subminiature Interlock Switches
18
Contact Configuration and Operation Chart
3NC
2NC-1NO
2NC
1NC-1NO
HS6B-02
HS6B-03
HS6B-12
HS6B-11
Actuator inserted completely Actuator removed completely
: Contact OFF (open)
Contact Operation ChartContact ConfigurationType
3433
3231
3433
12
Zb
11
11
Zb
12
12
22
Zb
11
21
31
21
11
Zb
32
22
12
21-22
33-34
11-12
31-32
11-12
21-22
5.8 28.2 (Travel: mm)
31-32
11-12
33-34
11-12
0
0.8 (Actuator Mounting Reference Position)
: Contact ON (closed)
5.5
Minimum Radius of Hinged Door
• When using the interlock switch on hinged doors, refer to the
minimum radius of doors shown below. When using on doors
with small minimum radius, use the angle adjustable actuator
(HS9Z-A65 and HS9Z-A66).
Note: Because deviation or dislocation of hinged doors may occur
in actual applications, make sure of the correct operation
before installation.
When using the HS9Z-A62 Right-angle Actuator
• When the door hinge is on the extension line of the interlock switch
surface:
• When the door hinged is on the extension line of the actuator
mounting surface:
When using the HS9Z-A65/HS9Z-A66 Angle Adjustable
Actuator
• When the door hinge is on the extension line of the interlock switch
surface:
• When the door hinge is on the extension line of the actuator
mounting surface
Actuator Angle Adjustment for the HS9Z-A65/HS9Z-A66
• Using the angle adjustment screw, the actuator angle can be
adjusted (see figures on page 17).
Adjustable angle: 0 to 20°
• The larger the adjusted angle of the actuator, the smaller the
applicable radius of the door opening.
• After installing the actuator, open the door. Then adjust the
actuator so that its edge can enter properly into the actuator
entry slot of the interlock switch.
• After adjusting the actuator angle, apply Loctite to the
adjustment screw so that the screw will not become loose.
Door Hinge
160 mm
Minimum Radius
Door Hinge
160 mm
Minimum Radius
Door Hinge
230 mm
Minimum Radius
Door Hinge
230 mm
Minimum Radius
Vertical AdjustmentHorizontal Adjustment
HS9Z-A65
HS9Z-A66
Door Hinge
Minimum Radius
50 mm
Door Hinge
Minimum Radius
50 mm
Label
Minimum Radius
Door Hinge
50 mm
Minimum Radius
50 mm
Door Hinge
Label
HS9Z-A66
HS9Z-A65
Vertical AdjustmentHorizontal Adjustment
Door Hinge
70 mm
Minimum Radius
70 mm
Minimum Radius
Door Hinge
Label
Door Hinge
Minimum Radius
70 mm
Minimum Radius
70 mm
Door Hinge
Label
HS9Z-A65
HS9Z-A66
HS9Z-A66
HS9Z-A65
(07/03/16)