User guide

561
2 System Configuration
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
DM Link Communication
External Device Setup Manual
2 System Configuration
The system configuration for the DM Link communication is shown below.
2.1 DM Link 1:1 Communication
2.2 DM Link 1:N Communication
- When using an RS232C connection with DM Link 1:N communication, only one MICRO/I or Touch unit can be con-
nected.
- When constructing a system using RS422/485, design the circuit so that when the external device receiver input is not
connected, the receiver output is in the mark state.