User guide

Chapter 2
538
External Device Setup Manual
22.4 Environment Settings
The communication port settings for FloBoss series and MICRO/I host port are as follows.
22.4.1 Connecting with FloBoss COM1 (RS485) or COM2 (RS232C)
Items Details
Interface RS232C, RS485
Baud Rate [bps] Use the same settings as for the
MICRO/I.
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data Bits 7, 8
Stop Bits 1, 2
Parity None, Even or Odd
Flow Control None
HMI Group No. Set the Group No. of MICRO/I.
HMI Unit No. Set the Unit No. of MICRO/I.
Controller Group No. Set the Group No. of FloBoss in Host I/F Network tab.
Controller Unit No. Set the Unit No. of FloBoss in Host I/F Network tab.