User guide

Chapter 2
326
External Device Setup Manual
11.2 System Configuration
This is the system configuration for the connection of GE Fanuc PLCs to MICRO/I screens.
11.2.1 Series 90-30 (Using Communication Coprocessor Module (CMM))
11.2.2 Series 90-30, VersaMax Micro (Using CPU Serial Port)
Connects to Serial port on Series 90-30 PLC Power Supply. Connects to Serial port 2 on VersaMax Micro PLC.
11.2.3 VersaMax Micro/Nano (Using Serial Port 1)
Connects to Serial port 1(RS232C) on VersaMax Micro/Nano PLC.
IC683CMM311 MICRO/I
RS232C
Connection Diagram 1
RS422/485 4-wire
Connection Diagram 2
Series 90-30
MICRO/I
RS422/485 4-wire
Connection Diagram 3
Series 90-30
VersaMax Micro (23, 28 point)
MICRO/I
RS422/485 4-wire
Connection Diagram 4
VersaMax Micro/ Nano