User guide

Chapter 2
214
External Device Setup Manual
4.7 The way to set device address when use Ethernet/IP (Logix Native Tag)
When using Ethernet/IP (Logix Native Tag) as a communication driver, the device address is set using tags.
In the case of WindO/I-NV2, you can set tag names by importing a tag database file (L5K file and CSV file) created using an Allen
Bradley RSLogix 5000.
4.7.1 Supported data type
Ethernet/IP(Logix Native Tag) supports these data types: Also supports arrays with elements of up to three-dimensions and user-
defined structure .
• BOOL*1
• INT*2
• DINT*2
• SINT*2
• REAL*2
• TIMER
• COUNTER
• CONTROL
*1 Does not support BOOL type arrays.
*2 Breakdown of bits for the INT, DINT, SINT and REAL type cannot be specified directly.