User guide

Chapter 2
96
External Device Setup Manual
2.4.3 MELSEC-Q/QnA Series: Settings for the Computer Link Unit
Refer to the Q-compatible Serial Communication Unit user manual (Basic) for details.
2.4.4 MELSEC-Q00, 01CPU: Connection to the Programming Port
Please confirm by parameter setup of MELSEC-Q00 and 01CPU “using a serial communication function.”
2.4.5 MELSEC-Q02CPU: Connection to the Programming Port
Item Setting
Interface RS232C, RS422
Communication protocol MC Protocol (Format 4)
Station Number
*1
*1. Set a decimal number for the Station Number.
The PLC settings are performed using the I/O allocation for the GPPW.
Use the same settings as
for the MICRO/I.
0(DEC)
Data Bits 7 or 8
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200 bps
Parity None, Even or Odd
Stop Bits 1 or 2
Checksum Code Yes
Write During RUN Possible
Item Setting
Station Number
*1
*1. Set a decimal number for the Station Number.
Use the same settings as
for the MICRO/I.
0(DEC)
Data Bits 8bit (fixed)
Baud Rate 19200, 38400, 57600 or 115200 bps
Parity Odd
Stop Bits 1bit
Checksum Code Yes
Item Setting
Data Bits 8bit(fixed)
Baud Rate 9600, 19200, 38400, 57600 or 115200 bps
Parity Odd
Stop Bits 1bit