Manual

3 Global Script
20-16 WindO/I-NV2 User’s Manual
Trigger Condition Tab
Trigger Type
Specify the condition to execute the script.
Device
Specify the bit device or bit of the word device.
This is enabled only when Rising-edge or Falling-edge is selected in Trigger Type.
Period (sec)
Specify the scan frequency in seconds (1 to 3,600).
This is enabled only when Fixed Period is selected in Trigger Type.
Rising-edge: Script is executed when trigger device changes from 0 to 1.
Falling-edge: Script is executed when trigger device changes from 1 to 0.
Always ON: The script is executed on every scan of the MICRO/I.
Fixed Period: Script is executed at set intervals.