Manual

WindO/I-NV2 User’s Manual 16-5
3 Data Storage Area Management Dialog Box
16
Data Storage Area
This section describes items and buttons on the Data Storage Area Management dialog box.
3.1 HG2G-S/-5S/-5F, HG3G/4G
■ Number of Stored Data for Alarm Log
Specifies the amount of Alarm Log data to save in the data storage area (HG2G-S/-5S: 0 to 5520,
HG2G-5F, HG3G/4G: 0 to 11660).
Alarm Log data is only saved in the data storage area when Store is selected under Block Settings, Data in the
Auto-Setup dialog box or in the Individual Settings dialog box for Alarm Log Settings.
■ Number of Stored Data for Operation Log
Specifies the amount of Operation Log data to save in the data storage area (HG2G-S/-5S: 0 to 3945,
HG2G-5F, HG3G/4G: 0 to 8330).
■ Number of Stored Data for Data Log per Device
Specifies the amount of Data Log data per device to save in the data storage area (HG2G-S/-5S: 0 to 13808,
HG2G-5F, HG3G/4G: 0 to 29165).
Data Log data is only saved in the data storage area when Enable is selected under Log function on the General
Tab i n the Individual Settings dialog box for Data Log Settings.
■ Number of HG Keep Register (LKR)
Specifies the number of HG keep register (LKR) addresses (1024 to 8192).
■ Number of HG Keep Relay (LK)
Specifies the number of HG keep relay (LK) addresses (1024 to 8192).
■ Free Space
Shows the amount of free space in the data storage area (in bytes).
■ Default
Returns the configured values to their default values.
3 Data Storage Area Management Dialog Box
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F