Manual

WindO/I-NV2 User’s Manual 16-3
2 Data Storage Area Configuration Procedure
16
Data Storage Area
This section describes the configuration procedure for the data storage area.
2.1 HG2G-S/-5S/-5F, HG3G/4G
1 On the Configuration tab, in the System Setup group, click Data Storage Area.
The Data Storage Area Management dialog box is displayed.
2 Specify the amount of Alarm Log data to save in the data storage area in Number of Stored Data for Alarm Log
(HG2G-S/-5S: 0 to 5520, HG2G-5F, HG3G/4G: 0 to 11660).
3 Specify the amount of Operation Log data to save in the data storage area in Number of Stored Data for
Operation Log (HG2G-S/-5S: 0 to 3945, HG2G-5F, HG3G/4G: 0 to 8330).
4 Specify the amount of Data Log data per device to save in the data storage area in Number of Stored Data for
Data Log per Device (HG2G-S/-5S: 0 to 13808, HG2G-5F, HG3G/4G: 0 to 29165).
5 Specify the number of HG keep register (LKR) addresses in Number of HG Keep Register (LKR) (1024 to 8192).
6 Specify the number of HG keep relay (LK) addresses in Number of HG Keep Relay (LK) (1024 to 8192).
7 Click OK.
The Data Storage Area Management dialog box closes.
This concludes configuring the data storage area.
2 Data Storage Area Configuration Procedure
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F