Manual

1 Overview
15-6 WindO/I-NV2 User’s Manual
1.4 Saving and Deleting Data
● Saving Data
The recorded data is saved in the data storage area.
If the saved data exceeds the Operation Log data storage amount, the oldest data is deleted and the new data is
saved.
Data Storage Amount
The maximum amount of data that can be saved in the data storage area is as follows.
● Deleting Data
The method to delete recorded data from the data storage area is as follows.
•On the Online tab in WindO/I-NV2, click the arrow under Clear, and click All or Operation Log Data. For details,
refer to Chapter 24 “4 Clear” on page 24-26.
•Touch Initial Setting on the System Menu, Initialize, Operation Log in order.
MICRO/I
130
Operaon Log data
Sampling Time User Screen No. Event Name Part Name Details Changed to
12/01/2011 12:00:10 - Base1 Power ON - - -
12/01/2011 12:01:23 User1 Base1 Switch to Base Screen - - Base2
12/01/2011 12:02:45 User1 Base2 Change Users - - User2
12/01/2011 12:03:06 User2 Base2 Change Operaon Modes - - System Mode
12/01/2011 12:04:11 User2 Base2 Press buons BitSwitch - -
12/01/2011 12:04:11 User2 Base2 Write Data to any Devices - LDR 0 55
Operaon Log data storage amount
Oldest data
(delete)
New data
When there is no remaining battery power and for the HG2G-5ST22VF-*, the data in the Operation Log is
erased when the MICRO/I is turned off.
Model Maximum amount of data that can be saved in the data storage area
HG2G-S/-5S 3,945
HG2G-5F, HG3G/4G 8,330
The maximum amount of data that can be recorded by a single operation is 150 items. When writing to
multiple devices in a single operation using the Multi-Button or other part, data over 150 items cannot be
recorded. If the data to be recorded in a single operation exceeds 150 items, HG special relay LSM 22 is set
to 1. For details, refer to Chapter 32 “HG Special Relay (LSM)” on page 32-3.