Manual

4 Using Data and Detected Alarms
13-30 WindO/I-NV2 User’s Manual
4.1 Displaying Saved Data with the Alarm Log Display
1 On the Configuration tab, in the System Setup group, click Alarm Log.
The Alarm Log Settings dialog box is displayed.
2 Select the type of device to monitor under Source Device Type on the Channel tab and specify Number of
Blocks.
3 Select the channel number to register and click Edit.
The Individual Settings dialog box is displayed.
4 Specify the device to monitor in Source and select Store under Data.
4 Using Data and Detected Alarms
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F