Manual

WindO/I-NV2 User’s Manual 13-5
1 Overview
13
Alarm Log Function
1.4 Data Configuration
The sampled data is composed of the channel number, message, alarm state, time, and label.
The relationship between the Alarm Log function settings and the sampled data is as follows.
1. Data storage amount: The amount of data that can be saved in the data storage area. For details, refer to “Data
Storage Amount” on page 13-8.
2. Channel No.: Composed of (Block No.)-(Channel No.). The devices to monitor and the conditions for alarm
occurrence and recovery are configured in the channels. When the sampled data is output as
a CSV file, the displayed label is “Ch.No.”.
3. Message: The message displayed when an alarm has occurred.
4. Alarm state and time: The alarm state (occurred, recovered, confirmed) and the time the alarm occurred, was
recovered from, and confirmed. When the sampled data is output as a CSV file, the
displayed label varies based on the output method.
5. Label: When the sampled data is output as a CSV file, this is the text displayed in the label row.
This cannot be changed.
Ś͘EŽ͘ DĞƐƐĂŐĞ KĐĐƵƌƌĞŶĐĞdŝŵĞ ZĞĐŽǀĞƌLJdŝŵĞ ŽŶĨŝƌŵĂƚŝŽŶdŝŵĞ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϬϬ͗Ϭϱ ϭϮͬϬϭϭϮ͗Ϭϭ͗ϭϬ ϭϮͬϬϭϭϮ͗Ϭϭ͗ϯϬ
 ϭͲϮ dĞŵƉĞƌĂƚƵƌĞĂďŶŽƌŵĂů  ϭϮͬϬϭͬϮϬϭϭϭϮ͗Ϭϭ͗Ϭϵ ϭϮͬϬϭϭϮ͗ϬϮ͗Ϯϭ ϭϮͬϬϭϭϮ͗ϬϮ͗ϱϱ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϬϮ͗ϬϬ ϭϮͬϬϭϭϮ͗Ϭϯ͗ϭϭ ϭϮͬϬϭϭϮ͗Ϭϱ͗ϭϮ
 ϭͲϯ KǀĞƌĐƵƌƌĞŶƚ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϯϬ͗Ϯϭ ϭϮͬϬϭϭϮ͗ϱϱ͗ϭϱ ϭϮͬϬϭϭϯ͗ϬϬ͗ϬϬ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϰϱ͗ϯϲ ϭϮͬϬϭϭϮ͗ϱϯ͗ϭϮ ϭϮͬϬϭϭϮ͗ϱϳ͗ϰϭ
ϭ͘ĂƚĂƐƚŽƌĂŐĞĂŵŽƵŶƚ
Ϯ͘ŚĂŶŶĞůEŽ͘
ϱ͘>ĂďĞů
ϯ͘DĞƐƐĂŐĞ ϰ͘ůĂƌŵƐƚĂƚĞĂŶĚƚŝŵĞ
Alarm Log settings
Sampled data