Manual

WindO/I-NV2 User’s Manual 12-27
4 Print Command
12
Commands
4.3 Properties of Print Command Dialog Box
This section describes items and buttons in the Properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Output to
Select where to direct the screenshot to.
■ Action Mode
Select the action to perform when the trigger condition is satisfied from the following:
*1 This is applicable for models with the memory card interface only.
Printer: Outputs the screenshot to the printer connected to the MICRO/I.
Memory Card
*1
:
Outputs the screenshot as a file to the memory card inserted in the MICRO/I.
Files are output as follows:
Series File format File name File size
HG2G-5F
HG3G/4G
JPEG
CAP***.JPG (***: date and time when file was output)
Example: A file created at 18:50:25 on June 30, 2011
will be named “CAP110630_185025.JPG”.
Depends on image
being displayed.
HG2F
Bitmap CAP***.BMP (***: serial number from 001 to 999)
77,878 bytes
HG3F 308,278 bytes
HG4F 481,078 bytes
• For details about printers, refer to Chapter 31 “Printer” on page 31-1.
• For details about memory cards, refer to Chapter 30 “1 Memory Cards” on page 30-1.
Print Screen: Outputs a screenshot of the current screen to the printer or the memory card.
Cancel Printing: Cancels printout to the printer.