Manual

2 Line Chart
11-38 WindO/I-NV2 User’s Manual
■ Cursor Position data
■ Cursor Style
Store numerical data: To store the numerical data at the position indicated by the cursor in internal devices, select
this check box and specify the destination word device.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
The data is stored in continuous device addresses starting from the specified device address
in order from Ch1 in the amount of charts displayed. The number of used devices varies
based on the data size. If there is no data at the cursor position, 0 is stored in the device.
Example: When specifying LDR 10 and storing the numerical data in Ch1 to Ch3
Data size configured in the Data Log: 16 bits
Data size configured in the Data Log: 32 bits
Store date and time data: To store the date and time data at the position indicated by the cursor in internal devices,
select this check box and specify the destination word device.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
The year, month, day, hour, minute, and second are stored in continuous devices in order as
BCD starting from the specified device address. If there is no data at the cursor position, 0 is
stored in the device.
Example: When storing the date and time data for October 1, 2011 12:01:30
Destination Numerical data
LDR 10 Ch1 numerical data
LDR 11 Ch2 numerical data
LDR 12 Ch3 numerical data
Destination Numerical data
LDR 10 LDR 11 Ch1 numerical data
LDR 12 LDR 13 Ch2 numerical data
LDR 14 LDR 15 Ch3 numerical data
Destination Date and time data
LDR 10 2011 (Year)
LDR 11 10 (Month)
LDR 12 1 (Day)
LDR 13 12 (Hour)
LDR 14 1 (Minute)
LDR 15 30 (Second)
Line Type: Selects the cursor line type from the following.
Solid, Dot, Dash, Long Dash, Long Dash Dot, Long Dash Dot Dot
Line Size: Selects the cursor line size from the following.
1 dot, 2 dots, 3 dots, 5 dots
Line Color: Selects the line color for the cursor (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.