Manual

2 Multi-State Lamps
9-16 WindO/I-NV2 User’s Manual
• Display a picture when in the OFF state.
*1
*1 HG2G-S/-5S/-5F, HG3G/4G only
MICRO/I
External device
D0
bit15 bit0
bit3
D0= 0100
bit0
bit3
D0= 0001
bit0
bit3
D0= 0010
bit0
bit3
D0= 0000
bit0
bit3
OFF State:
0
State:
1
State:
2
The conditions to display the picture set by the OFF state
*1
on the screen are as follows.
• Y is selected under Flash on the State tab and the trigger condition is not satisfied.
• Switching Method on the General tab is Bit, and the all bit are 0 or a bit not allocated a picture is 1.
• Switching Method on the General tab is Value, and the value of device is a number not allocated a
picture.