Manual

WindO/I-NV2 User’s Manual 8-151
9 Potentiometer
8
Buttons
● Trigger Condition Tab
The Trigger Condition tab is displayed in Advanced mode.
■ Input Condition
The Potentiometer is enabled and operational while the condition is satisfied. The Potentiometer is disabled and not
operational while the condition is not satisfied.
Example: When Trigger Type is While ON and Device is LM 0
While LM 0 is 0, the condition is not satisfied and the Potentiometer is not operational.
While LM 0 is 1, the condition is satisfied and the Potentiometer is operational.
Trigger Type: Selects the condition to enable the Potentiometer from the following.
Always enable: The Potentiometer is always enabled.
While ON: Enables the Potentiometer when the device value is 1.
LM0
:
MICRO/I
0
LM0
:
1
Button
Does not
operate
Button
Operates
Condition
Not
satisfied
Condition
Satisfied
Enabled
Potentiometer
state
1
0
Device value
Disabled Disabled DisabledEnabledEnabledEnabled
Potentiometer
state