Manual

3 Project Settings Dialog Box
4-60 WindO/I-NV2 User’s Manual
3.13 Web Server Tab
The Web Server tab configures the MICRO/I's Web Server function. For details, refer to Chapter 27 “1 Web Server
Function (HG2G-5F, HG3G/4G)” on page 27-1.
■ Disable Web Server function
Select this check box to prohibit access from a web browser terminal.
When accessing the MICRO/I from a web browser terminal, not only is remote control and remote monitoring not
displayed, but the detailed system information page is also not displayed.
■ Remote Control and Monitoring
Select the functions allowed when accessing the MICRO/I from a web browser terminal from the following.
■ Execution Interval (msec)
Specifies the interval (0 to 5,000 ms) for the MICRO/I to return data. The load that the remote control function and
the remote monitoring function place on MICRO/I operation can be reduced by increasing this value. However, the
display update speed in the web browser will become slower.
■ Port No.
Specifies the port number to use for the Web Server function (0 to 65,535).
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Enable Remote Control and Monitor: Displays a screenshot of the screen displayed on the MICRO/I. You can also
control the MICRO/I being monitored by clicking on the displayed screenshot.
Enable Remote Monitor only: Displays a screenshot of the screen displayed on the MICRO/I.
Disable: Displays only the detailed system information page.