Manual

3 Project Settings Dialog Box
4-58 WindO/I-NV2 User’s Manual
3.11 USB Flash Drive Tab
The USB Flash Drive tag is used to configure the functions for a USB flash drive inserted in the MICRO/I. For details
on USB flash drives, refer to Chapter 30 “2 USB Flash Drives” on page 30-25.
■ Enable USB Autorun
Select this check box to enable the USB Autorun function.
The USB Autorun function automatically displays a menu screen from which the user can execute predefined
commands when a USB flash drive is inserted in the MICRO/I.
■ Open Popup Screen when USB Flash Drive is inserted
Select this check box to display a popup screen when a USB flash drive is inserted in the MICRO/I.
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Screen No.: Specifies the popup screen number (1 to 3015) to display when a USB flash drive
is inserted in the MICRO/I.
Coordinates X, Y: Specifies the coordinates to display the popup screen.
With the upper-left corner of the screen as the origin, the X and Y coordinates are
the upper-left corner of the popup screen.
The units and range for the display coordinates are as follows.
HG2G-5F, HG3G/4G: Specify the coordinates in 1 dot units.
X: 0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)