Manual

WindO/I-NV2 User’s Manual 4-55

3 Project Settings Dialog Box

Project Settings

3.9 Printer Tab

The Printer tab is used to configure the printer that is connected to the MICRO/I.

■ Printer Code/Manufacturer

Selects the printer control commands. For details on the printer control commands and printers that can be used,

refer to Chapter 31 “1.4 Supported Printers” on page 31-3.

■ Details

Shows the primary printers that support the selected printer control commands.

■ Form

Selects the paper size to output from the following. When the O/I type is the HG2G-5F or the HG3G/4G, this option is

configured on the printer side.

Letter, A4, Receipt(60 mm width)

, Receipt(112 mm width)

■ Print Color

Selects the color when printing as Color or Gray Scale. When the O/I type is the HG2G-5F or the HG3G/4G, this

option is configured on the printer side.

*1 HG1F/2F/2S/3F/4F only

HG3G

HG2G-5FHG2G-5SHG2G-S

HG4G HG1F HG2F HG2S HG3F HG4F

HG2G-5F, HG3G/4G: PictBridge

HG1F/2F/2S/3F/4F: ESC/P, PC-PR, PCL, SII, ESC/P Raster

Reverse Mode: Select this check box to reverse only black or white when printing. When Color is selected, this

option is disabled, even when selected.