Manual

WindO/I-NV2 User’s Manual 4-51
3 Project Settings Dialog Box
4
Project Settings
3.7 User Communication Tab
The User Communication tab is used to configure communication with external devices such as barcode readers.
For details, refer to Chapter 3 “5 User Communication” on page 3-7. This option can only be configured when User
Communication 1, User Communication 2, or User Communication 3 is selected for Protocol under
Interface Settings on the Communication Interface tab.
■ Settings
Edits the user communication settings. You can use up to three user communication settings.
■ Edit
Registers or changes the selected user communication settings. Select a user communication number and click this
button to display the User Communication Protocol Settings dialog box. For details, refer to Chapter 3 “User
Communication Protocol Settings Dialog Box” on page 3-24.
■ Browse
Selects a protocol to use as user communication with Protocol Manager. Click this button to display Protocol Manager.
■ Clear
Deletes the protocol set to user communication in Settings.
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
User Communication: Shows the user communication number.
Protocol Name: Shows Protocol Name configured in the User Communication Protocol Settings dialog
box.