Manual

6 USB Driver
A-24 WindO/I-NV2 User’s Manual
Windows Vista
Follow these steps to install the HG2F USB driver.
1 Connect the USB cable to the USB interface on the MICRO/I (with power supplied) and the USB port on the computer
(computer should be on).
The following dialog box appears.
2 Click Locate and install driver software (recommended).
3 Click Install this driver software anyway.
The USB driver installation begins.
The USB interface on the HG2F supports only the 32-bit edition of Windows Vista. It does not support the
64-bit edition.
HG2F
MICRO/I
Computer
USB cable
A plug Mini-B plug
To USB port To USB interface