Manual

WindO/I-NV2 User’s Manual 34-33
2 HG2G-5F, HG3G/4G
34
MICRO/I Specifications
● System Mode
Press the [System Mode] at the top of the Maintenance Screen. The Top page Screen appears.
• Initial Setting, Self Diagnosis and Initialization of the data, etc can be executed in the System mode.
●
Adjusting the Brightness
The brightness of the HG2G-5F, HG3G/4G display can be adjusted on the Adjust Brightness Screen. Adjust the
brightness to the best condition as required.
1 Press the [Adjust Brightness] at the bottom of the Maintenance Screen. The Adjust Brightness Screen appears.
2 Press the [<<] and [>>] at the bottom the Adjust Brightness Screen to adjust the contrast to the optimal setting.
3 Press the [X] to close the Adjust Brightness Screen.
To adjust the brightness in the System Mode, use the [<<] and [>>] buttons located at the bottom of the top page.

System Mode Top Page Screen