Manual

ManualsBrandsIDEC ManualsEquipmentHigh Performance Series

1261

2 USB Flash Drives

30-26 WindO/I-NV2 User’s Manual

2.3 Overview of the USB Autorun Function

The USB Autorun function automatically displays a menu screen from which the user can execute predefined

commands when a USB flash drive is inserted into the MICRO/I.

The commands that can be executed with the USB Autorun function are as follows.

●

Downloading a project file

Downloads a project file (ZNV format) saved on a USB flash drive or an SD memory card to the MICRO/I.

When the download is complete, the MICRO/I will reset and start running from the beginning of the project that was

just downloaded.

HG3G

HG2G-5F

HG4G

USB Autorun Function Menu Screen

USB flash drive

Production line A - replace

display program

Copy display program to USB

flash drive

Replace sound data Copy PLC program to USB

flash drive

Production line A - replace

PLC program

Run All Cancel

Confirmation

Press the command to execute.

USB Autorun

definition file

(hgauto.ini)

MICRO/I

• This allows operators to change project files and PLC programs without using a computer.

• These defined processes are called commands, and the file that contains the details of the command and

menu screen is called the USB Autorun definition file (hgauto.ini).

• A USB Autorun definition file (hgauto.ini) must be stored on the USB flash drive to use the USB Autorun

function.

• An SD memory card can be used as the destination for saving project files (ZNV format) , PLC program

files (ZLD format), and for copying files.

HG3G

HG2G-5F

HG4G

Save

Download

Computer

SD Memory

Card