Manual

1 Memory Cards
30-8 WindO/I-NV2 User’s Manual
Uploading
This procedure shows how to upload specified data from the Memory Card Folder on the memory card for the
currently running project.
1 On the Home tab, in the Project group, click the arrow next to Upload.
2 Click Stored Data in Memory Card.
The Upload from Memory Card dialog box appears.
3 Specify the type of data to upload by checking the appropriate items.
4 Specify the destination folder in the Path box.
5 Click OK.
The Memory Card Maintenance dialog box appears and the data upload begins.
A message box appears when the data upload is complete.
Uploadable data differs depending on the model type.
*1 This is applicable for models with a video interface only.
Data to upload HG2G-5F, HG3G/4G HG2F HG3F/4F
Screenshot Data YES YES YES
Alarm Log Data YES YES YES
Data Log Data YES YES YES
Operation Log Data YES NO NO
Recipe Files YES YES YES
Picture Files YES NO NO
Sound Files YES NO NO
Movie File List
YES
*1
NO NO
Movie Files
YES
*1
NO NO
• Click to call up the Select a Folder dialog box and specify the destination folder for uploading.
• After starting WindO/I-NV2, screen shots, alarm log data, data log data, and recipe files can be uploaded
from a memory card folder without opening project data.
If security is enabled for the project on MICRO/I, a dialog appears for you to enter a user name and
password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.