Manual

WindO/I-NV2 User’s Manual 30-5
1 Memory Cards
30
External Memory Devices
1.4 Reading/Writing Data
● Using WindO/I-NV2 to read and write to a memory card inserted in the MICRO/I
This procedure shows how to read and write data to the memory card folder specified for the project currently
running on the MICRO/I.
■ HG2G-5F, HG3G/4G
Use either method below to make the connection.
• Connect a USB cable to the USB port on the computer and the USB interface on the MICRO/I.
• Connect an Ethernet cable to the Ethernet port on the computer and the Ethernet interface on the MICRO/I.
■ HG2F
Use either method below to make the connection.
• Connect a serial cable to the serial port on the computer and the serial interface 2 on the MICRO/I.
• For USB-ready models, connect a USB cable to the USB port on the computer and the USB interface on the
MICRO/I.
■ HG3F/4F
Use either method below to make the connection.
• Connect a serial cable to the serial port on the computer and the serial interface 2 on the MICRO/I.
• Connect an Ethernet cable to the Ethernet port on the computer and the Ethernet interface on the MICRO/I.
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
MICRO/I
Computer
USB Cable
Ethernet Cable
SD Memory Card
HG3G HG2G-5F HG4G
To USB Port To USB Interface
Mini-B PlugA Plug
To Ethernet Port To Ethernet Interface
MICRO/I
Serial Cable
Computer
USB Cable
HG2F
CF Card
To Serial Port To Serial Interface 2
To USB Port To USB Interface
Mini-B PlugA Plug
Serial Cable
Computer
MICRO/I
Ethernet Cable
HG3F HG4F
CF Card
To Serial Port To Serial Interface 2
To Ethernet Port To Ethernet Interface