Manual

WindO/I-NV2 User’s Manual 30-1
30
External Memory Devices
This chapter describes the specifications, functions, and notes to observe when using external memory devices with
the MICRO/I.
1.1 Supported Memory Cards
The supported memory cards is different for each MICRO/I model.
1.2 CF Card
● CF Card Functions
The following functions are available when a CF card is inserted in the MICRO/I.
•Transfer projects
 Refer to Chapter 28 “1 Project Transfer Function” on page 28-1.
• Screenshot output
 Refer to Chapter 8 “4.2 Print Button Configuration Procedure” on page 8-52, and Chapter 12 “4.2 Print
Command Configuration Procedure” on page 12-26.
• Alarm Log output
 Refer to Chapter 13 “Memory Card Output Tab” on page 13-21.
• Data Log output
 Refer to Chapter 14 “Memory Card Output Tab” on page 14-19.
• Reading/writing recipe data
 Refer to Chapter 18 “Recipe Function” on page 18-1.
• Displaying picture files
 Refer to “Write Picture File to Memory Card” on page 2-33.
●
Specifications
Models HG2F/3F/4F support CF cards with the following specifications:
• Capacity 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB.
• Compatible with FAT16 or FAT32 formatting.
•Shift JIS support.
Half-width kana characters are not supported for file and directory names. Full-width kana characters are
supported.
Chapter 30 External Memory Devices
1Memory Cards
Memory Cards HG2G-5F, HG3G/4G HG2F/3F/4F
CF Card NO YES
SD Memory Card YES NO
Memory cards can only be used on models equipped with a memory card interface.
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Use of IDEC, HG9Z-MF128 CF Card (128 MB capacity) is recommended.