Manual

WindO/I-NV2 User’s Manual 28-27
2 PLC Program Transfer Function
28
Data Transfer Function
11 Press COPY.
A process confirmation message is displayed.
12 Specify the MICRO/I communication port and PLC network number or station number, and then press YES.
The PLC program file download starts.
When the download finishes, the results are displayed.
13 Press Ack to close the results screen.
You are returned to the top page of system mode.
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
SD card
FORMAT
DRIVE:
PLC
FORMAT
HGDATA01 < DIR >
PLOGRAM01.zld
PLC.ZLD
YES NO
Copy This File ?
PLOGRAM01.zld
Comm.I/F:
Network Number:
Communication port
Network number or
station number
000
SERIAL 1
When downloading a PLC program file to a PLC configured with a password, the PLC password screen is
displayed. Enter the password.
Download PLC Program
Function
The following function completed
Result
Ack