Manual

WindO/I-NV2 User’s Manual 28-1
28
Data Transfer Function
This chapter describes the project transfer function to upload and download project data to the MICRO/I, to upload
and download PLC program files to a PLC connected to the MICRO/I, (both of which use a memory card or USB flash
drive), as well as the function to copy files between an SD memory card and a USB flash drive.
These three functions for exchanging data using a memory card or USB flash drive are collectively called data transfer
functions.
1.1 What Can Be Done with the Project Transfer Function
The project transfer function uploads or downloads project data between the MICRO/I and a memory card or USB
flash drive inserted in the MICRO/I.
●
Download project data saved on a memory card or USB flash drive to the MICRO/I. However, you
must create project data for transfer.
• HG2G-5F, HG3G/4G
•HG2F/3F/4F
Chapter 28 Data Transfer Function
1 Project Transfer Function
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
HG3G HG2G-5F HG4G
SD Memory Card
Create Project File
for Transfer
Create Project File
for Transfer
Download
Download
MICRO/IComputer
Project File
(ZNV Format)
USB flash drive
Project File
(ZNV Format)
HG2F HG3F HG4F
CF Card
Create Project Data
for Transfer
Download
Computer
Project Data
MICRO/I
Project Data
Memory cards can only be used on models that have the memory card interface.