Manual

2 Correspondence model Pass-Through
26-2 WindO/I-NV2 User’s Manual
2.1 MICRO/I
The Pass-Through function can only be used with the following communication interfaces.
2.2 PLC
The Pass-Through function is available for the following PLC models.
*1 HG2G-S only
*2 HG2G-5S only
*3 Use WindLDR Ver.5.00 or higher when you use the Ethernet Pass-Through functon.
*4 User programs cannot be downloaded and uploaded through FC5A-SIF2 with Pass-Through Function.
*5 We tested by GX Developer Version 8
2 Correspondence model Pass-Through
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
MICRO/I Type Serial Interface Ethernet Interface USB Interface
HG2G-S/-5S
Supported
*1
Supported
Supported
*2
HG2G-5F, HG3G/4G Not supported Supported Supported
HG1F Supported Not supported Not supported
HG2F (Serial Interface 2: RS232C Type) Supported Not supported Not supported
HG2F (Serial Interface 2: USB Type) Not supported Not supported Not supported
HG2S Supported Not supported Not supported
HG3F Supported Supported Not supported
HG4F Supported Supported Not supported
Manufacturer Series Name System (CPU unit) Host I/F Driver
IDEC
OpenNet Controller FC3A
OpenNet,MicroSmart,SmartAXIS
Pro/Lite(RS232C/485)
*3
MicroSmart FC4A
MicroSmart Pentra
FC5A
*4
Mitsubishi
*5
FX Series FX0, FX0N, FX1, FX2, FX2C, FX1S MELSEC-FX (CPU)
FX2N, FX2NC, FX1N, FX1NC MELSEC-FX2N (CPU)
FX3U, FX3UC MELSEC-FX3UC (CPU)
QCPU Q02CPU, Q02HCPU MELSEC-Q (CPU)
WindO/I-NV2 updates are available from the IDEC web site. Visit www.idec.com for the latest information
and updates.